Displaying User-Set Parameters Only - Omron VARISPEED E7 User Manual

Displaying User-set Parameters Only

The A2 parameters (user-set parameters) and A1-01 (parameter access level) can be used to establish a param-
eter set that contains only the most important parameters.
Set the number of the parameter to which you want to refer in A2-01 to A2-32, and then set A1-01 to 1. Using
the advanced programming mode you can read and modify A1-01 to A1-03 and the parameters set in A2-01 to
A2-32 only.
Related Parameters
Param-
eter Name
Number
A2-01
to User setting parameters
A2-32
Description
Used to set the parameter numbers that can be set/
read. Maximum 32.
Effective when the access level (A1-01) is set to
User Program (1). Parameters set in A2-01 to A2-
32 can be set/read in programming mode.
Change
Setting Factory during Access
Range Setting Opera- Level
tion
b1-01
to – No A
o2-08
6
111
6-