Omron VARISPEED E7 User Manual page 117

Multi-function Analog Outputs: H4
Param-
eter
Number
Monitor selec-
H4-01 tion (terminal
FM)
Gain (terminal
H4-02
FM)
Bias (terminal
H4-03
FM)
Monitor selec-
H4-04 tion (terminal
AM)
5
Gain (terminal
H4-05
AM)
Bias (terminal
H4-06
AM)
Analog output 1
H4-07 signal level selec-
tion
Analog output 2
H4-08 signal level selec-
tion
* An analog output signal of 4 - 20 mA requires an optional terminal board for current output.
30
5-
Name Description
Sets the number of the monitor
item to be output (U1-
minal FM.
Sets the multi-function analog out-
put 1 (terminal FM) gain.
Sets the percentage of the monitor
item that is equal to 10V output at
terminal FM. Note that the maxi-
mum output voltage is 10V.
Sets the multi-function analog out-
put 1 (terminal FM) bias.
Sets the percentage of the monitor
item that is equal to 0V output at
terminal FM.
The maximum output from the ter-
minal is 10 V.
Sets the number of the monitor
item to be output (U1-
minal AM.
Set the multi-function analog out-
put 2 (terminal AM) gain.
Sets the percentage of the monitor
item that is equal to 10V output at
terminal AM. Note that the maxi-
mum output voltage is 10V.
Sets the multi-function analog out-
put 2 (terminal AM) bias.
Sets the percentage of the monitor
item that is equal to 0V output at
terminal AM.
The maximum output from the ter-
minal is 10 V.
Sets the signal output level for
multi-function output 1 (terminal
FM)
0: 0 to +10 V output
2: 4 – 20 mA*
Sets the signal output level for
multi-function output 2 (terminal
AM)
0: 0 to +10 V output
2: 4 – 20 mA*
Change
Setting Factory during
Range Setting Opera-
) at ter- 1 to 53 2
0 to
1000.0 100% Yes
%
-110 to
0.0% Yes
+110%
) at ter- 1 to 53 8
0 to
1000.0 50.0% Yes
%
-110.0
to
0.0% Yes
+110.0
%
0 or 2 0
0 or 2 0
MEMO-
Access
BUS Page
Level
Register
tion
No A 41DH 6-64
Q 41EH 6-64
A 41FH 6-64
No A 420H 6-64
Q 421H 6-64
A 422H 6-64
No A 423H 6-64
No A 424H 6-64