Omron VARISPEED E7 User Manual page 55

Straight Solderless Terminals for Signal Lines
Models and sizes of straight solderless terminal are shown in the following table.
Wire Size mm
0.25 (24)
0.5 (20)
0.75 (18)
1.25 (16)
2 (14)
2
Wiring Method
Use the following procedure to connect wires to the terminal block.
1. Loosen the terminal screws with a thin-slot screwdriver.
2. Insert the wires from underneath the terminal block.
3. Tighten the terminal screws firmly
Strip the end for
7 mm if no solder-
less terminal is
used.
20
2-
Table 2.8 Straight Solderless Terminal Sizes
2
Model
(AWG)
AI 0.25 - 8YE
AI 0.5 - 8WH
AI 0.75 - 8GY
AI 1.5 - 8BK
AI 2.5 - 8BU
Fig 2.9 Straight Solderless Terminal Sizes
Screwdriver
Solderless terminal or wire
without soldering
Wires
Fig 2.10 Connecting Wires to Terminal Block
d1 d2 L
0.8 2 12.5
1.1 2.5 14
1.3 2.8 14
1.8 3.4 14
2.3 4.2 14
Blade of screwdriver
Control circuit
terminal block
Blade thickness: 0.6 mm max.
Manufacturer
Phoenix Contact
3.5 mm max.