Omron VARISPEED E7 User Manual page 138

Parame-
ter Num- Name
ber
– Inverter Capacity
o2-04 kVA selection
Energy-saving coeffi-
b8-04
cient
Carrier frequency selec-
C6-02
*
tion
E2-01 Motor rated current
E2-03 Motor no-load current
Motor line-to-line resist-
E2-05
ance
Momentary power loss
L2-02
ride through time
Min. baseblock (BB)
L2-03
time
L2-04 Voltage recovery time
L8-02 Overheat pre-alarm level
Note:Attach a Momentary Power Interruption Compensation Unit if compensation for power interruptions of up to 2.0 seconds is required for 200 V class
Inverters with outputs of 0.4 to 11 kW.
* If C6-02 is set to 0, 1, or F and the initial value of C6-03 and C6-04 is 2.0 kHz, the initial settings for C6-02 are as follows: 2: 5.0 kHz, 3: 8.0 kHz,
4: 10 kHz, 5: 12.5 kHz, and 6: 15 kHz. If the carrier frequency is set higher than the factory setting for Inverters with outputs of 30 kW or more, the
Inverter rated current will need to be reduced.
Unit Factory Setting
kW 160 185 220 300
– 34 35 36 37
– 30.13 30.57 27.13 21.76
– 2 2 1
A 270.0 310.0 370.0 500.0
A 70.0 81.0 96.0 130.0
W 0.029 0.025 0.020 0.014
s 2.0 2.0 2.0 2.0
s 1.8 1.9 2.0 2.1
s 1.0 1.0 1.0 1.0
°C
108 95 100 108
1
5
51
5-