Omron VARISPEED E7 User Manual page 102

Timer Function: b4
Param-
eter Name
Number
Sets the timer function output ON-
delay time (dead time) for the timer
Timer function
b4-01 function input, in 1-second units.
ON-delay time
Enabled when a timer function is
set in H1-
Sets the timer function output
OFF-delay time (dead band) for the
Timer function timer function input, in 1-second
b4-02
OFF-delay time units.
Enabled when a timer function is
set in H1-
PI Control: b5
Param-
eter Name
Number
0: Disabled
PI control mode 1: Enabled
b5-01
selection 3: PI control enabled (frequency
Sets P-control proportional gain.
Proportional gain
b5-02 P-control is not performed when
(P)
the setting is 0.00.
Sets I-control integral time in 1-
second units.
b5-03 Integral (I) time
I-control is not performed when the
setting is 0.0.
Sets the I-control limit as a per-
b5-04 Integral (I) limit centage of the maximum output
frequency.
Sets the limit after PI-control as a
b5-06 PI limit percentage of the maximum output
frequency.
Sets the offset after PI-control as a
PI offset adjust-
b5-07 percentage of the maximum output
ment
frequency.
Sets the time constant for low pass
PI delay time filter for PI-control outputs in 1-
b5-08
constant second units.
Usually not necessary to set.
Selects forward/reverse direction
PI output charac- for PI output.
b5-09
teristics selection 0: PI output is forward.
1: PI output is reverse
b5-10 PI output gain Sets output gain.
0: Limit to 0 when PI output is
1: Reverses when PI output is neg-
PI reverse output
b5-11
selection
Limit to 0 is also active when
reverse prohibit is selected by
b1-04.
Description
and H2- .
and H2-
Description
reference + PI output)
negative.
ative.
Change
Setting Factory during Access
Range Setting Opera- Level
tion
0.0 to
0.0 s No A
3000.0
0.0 to
0.0 s No A
3000.0
Change
Setting Factory during Access
Range Setting Opera- Level
tion
0, 1, 3 0 No A
0.00
to 1.00 Yes A
25.00
0.0 to
1.0 s Yes A
360.0
0.0 to
100.0% Yes A
100.0
0.0 to
100.0% Yes A
100.0
-100.0
to 0.0% Yes A
+100.0
0.00 to
0.00 s Yes A
10.00
0 or 1 0 No A
0.0 to
1.0 No A
25.0
0 or 1 0 No A
MEMO-
BUS Page
Register
1A3H 6-83
1A4H 6-83
MEMO-
BUS Page
Register
1A5H 6-84
5
1A6H 6-84
1A7H 6-84
1A8H 6-84
1AAH 6-84
1ABH 6-84
1ACH 6-84
1ADH 6-84
1AEH 6-84
1AFH 6-84
15
5-