Cts Role-Based Batched-Programming - Cisco Nexus 5500 Series Command Reference Manual

Chapter C Commands

cts role-based batched-programming

To enable CTS batched programming, use the cts role-based batched-programming command.
Syntax Description
This command has no arguments or keywords.
Command Default None
Command Modes Configuration mode
Command History Release
6.0(2)N2(2)
Examples This example shows how to enable CTS batched programming:
switch# configure terminal
switch(config)# cts role-based batched-programming
Related Commands Command
OL-27883-02
cts role-based batched-programming
no cts role-based batched-programming
Modification
This command was introduced.
Description
Cisco Nexus 5500 Series NX-OS Security Command Reference
cts role-based batched-programming
33