Show Fm Vlan - Cisco Catalyst 3550 Command Reference Manual

show fm vlan

show fm vlan
Use the show fm vlan privileged EXEC command to display per-VLAN feature-manager information.
Use with the show fm vlan-label privileged EXEC command to get information about features applied
to the VLAN.
Syntax Description vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show fm vlan 1 command that shows an ACL configuration
conflict. It displays the VLAN label used in hardware for VLAN feature configuration.
Switch# show fm vlan 1
Conflicts exist with layer 2 access groups.
Input VLAN Label:1
Output VLAN Label:0 (default)
Priority:normal
Related Commands Command
show fm interface
show fm
Catalyst 3550 Multilayer Switch Command Reference
2-270
show fm vlan vlan-id [ | {begin | exclude | include} expression]
Any VLAN ID, whether or not a switch virtual interface (SVI) has been assigned. The
range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Description
Displays per-interface feature manager information.
Displays feature-manager information for a specified label and lists
configuration conflicts or features associated with that label that were not
able to fit into the hardware.
Chapter 2 Cisco IOS Commands
78-11195-09