Winding Of The Scanner Drive Cable - Minolta EP1054 Service Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13

(4) Winding of the Scanner Drive Cable

(23 cpm copier)
Remark
Whenever the Scanner Drive Cable has been rewound, be sure to make the "Adjustment of
the Scanner/Mirrors Carriage Position." See p. D-69.
Pulley C
1149D038AB
1174D007AA
Pulley B
Scanner Drive Gear
1. (With reference to the center of the entire length of
the cable) Wind one length of the cable 5 times
counterclockwise around the Pulley, starting with
the end of the D-cut on the pulley shank and work-
ing from the front to the back side. Then, secure
the cable with tape.
2. Mount the Cable Drive Pulley on the Pulley Shaft
and fit the Support Plate.
D-25
Pulley A
1149D047AB