Alcatel-Lucent 5620 Troubleshooting Manual page 78

Release 12.0 R4 | August 2014 | 3HE 08864 AAAD TQZZA Edition 01
3 — Troubleshooting services and connectivity
Option
-p port
-t timeout
-r retries
(2 of 2)
The utility displays status messages similar to the following as it initializes:
Init Products ...
Init ProductFamilyDefs ...
Init PollingDirectiveDefs ...
Start reading from Node ...
The utility then begins to retrieve the MIB tables. As It processes a MIB table, it
lists the table name and the number of entries the table contains, as shown below:
IF-MIB.ifEntry : 21
IP-MIB.ipAddrEntry : 5
MPLS-LSR-STD-MIB.mplsInterfaceEntry : 8
MPLS-TE-STD-MIB.mplsTunnelEntry : 0
MPLS-TE-STD-MIB.mplsTunnelHopEntry : 0
MPLS-TE-STD-MIB.mplsTunnelARHopEntry : 0
MPLS-TE-STD-MIB.mplsTunnelCHopEntry : 0
MPLS-LDP-STD-MIB.mplsLdpEntityEntry : 3
MPLS-LDP-STD-MIB.mplsLdpEntityStatsEntry : 3
MPLS-LDP-STD-MIB.mplsLdpPeerEntry : 3
The utility is finished when the command prompt is displayed.
5 To view the utility output, open the file using a MIB browser or a text editor.
3-20
Description
The TCP port on the main server that snmpDump must use to reach the
GNE
Default: 161
A communication timeout value
The number of times to retry connecting to the GNE
Alcatel-Lucent 5620 Service Aware Manager
Troubleshooting Guide
5620 SAM