Alcatel-Lucent 5620 Troubleshooting Manual page 15

Release 12.0 R4 | August 2014 | 3HE 08864 AAAD TQZZA Edition 01
Example of options in a procedure
At step 1, you can choose option
indicates.
1 This step offers two options. You must choose one of the following.
a
b
2 You must perform this step.
Example of substeps in a procedure
At step 1, you must perform a series of substeps within a step. At step 2, you must
do what the step indicates.
1 This step has a series of substeps that you must perform to complete the step. You
must perform the following substeps.
i
ii
iii
2 You must perform this step.
Measurement conventions
Measurements in this document are expressed in metric units and follow the Système
international d'unités (SI) standard for abbreviation of metric units. If imperial
measurements are included, they appear in brackets following the metric unit.
Table
Measurement
bit
byte
kilobits per second
Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Troubleshooting Guide
This is one option.
This is another option.
This is the first substep.
This is the second substep.
This is the third substep.
3 lists the measurement symbols used in this document.
Table 3 Bits and bytes conventions
a or b. At step 2, you must do what the step
Symbol
b
byte
kb/s
Preface
xv