Alcatel-Lucent 5620 Troubleshooting Manual page 135

Release 12.0 R4 | August 2014 | 3HE 08864 AAAD TQZZA Edition 01
10 To remove one or more log entries from the current view, perform one of the
following.
a
b
c
d
11 To apply a quick filter, enter a regular expression as a match criterion in the field
below a column header and press ↵. The list is cleared, and only subsequent log
entries that match the criterion are displayed. See Procedure
information about using filters.
12 Repeat
To apply a saved filter, perform the following steps.
13
i
ii
14 To remove a filter from the log, select the filter in the Filter sub-tab and choose
Log→Remove Selected Filters, or click on the Remove filter button in the main
tool bar.
15 If the log display is static, such as for an archived log or the result of a Find All
operation, go to step 22.
Dynamic view operations
16 To edit the log display properties, choose Edit→Edit Log from the LogViewer main
menu, or click on the Edit log button in the log tab tool bar, and perform the
following steps.
i
ii
iii
Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Troubleshooting Guide
To clear all listed log entries, choose Log→Clear All Events from the
LogViewer main menu, or click on the Clear all button in the main tool bar.
To clear the currently selected log entries, choose Log→Clear Selected
Events from the LogViewer main menu, or click on the Clear selected button
in the main tool bar.
To clear all log entries that match the currenly selected cell, select a cell
and choose Log→Hide All Like Selected from the LogViewer main menu, or
click on the Hide All Like Selected button in the main tool bar.
To show only log entries that match the currently selected cell, select a cell
and choose Log→Show All Like Selected from the LogViewer main menu, or
click on the Show All Like Selected button in the main tool bar.
11 step to apply an additional quick filter, if required.
Choose Log→Add Filter from the LogViewer main menu, or click on the Add
filter button in the main tool bar. The Select Filters form opens.
Select one or more filters in the list and click on the OK button. The filters
are applied to the log view and are listed on the Filters sub-tab of the log tab.
See Procedure 11-7 for information about creating saved filters.
Configure the Max. Messages parameter to specify the maximum number of
entries that are listed on the log tab. LogViewer removes the oldest entries
as required to keep the number of entries at or below this value.
Configure the Auto-Tail parameter to specify whether the log tab
dynamically displays the log updates.
Click on the OK button to close the Local Log File form.
11 — Troubleshooting with the 5620 SAM LogViewer
11-7 for more
11-9