Alcatel-Lucent 5620 Troubleshooting Manual page 72

Release 12.0 R4 | August 2014 | 3HE 08864 AAAD TQZZA Edition 01
3 — Troubleshooting services and connectivity
8 Run the diagnostic. Set the diagnostic configuration for a Tunnel Ping from site ID
10.1.200.51/32 to site ID 10.1.200.53/32 using the network in Figure 3-1, by
specifying the return ID of the tunnel you want to test.
Click on the Results tab to view the list of trace responses. Double-click on a row
in the list to view its details. Double-click on the entry in the Tunnel Ping results
form to view the diagnostic details.
9 Review the diagnostic results and assess whether the configuration meets the
network requirements.
Table
Displayed message
Request Timeout
Orig-SDP Non-Existent
Orig-SDP Admin-Down
Orig-SDP Oper-Down
Request Terminated
Far End: Originator-ID Invalid
Far End: Responder-ID Invalid
Far End:Resp-SDP Non-Existent
Far End:Resp-SDP Invalid
Far End:Resp-SDP Down
Success
a
b
3-14
3-4 lists the displayed messages.
Table 3-4 Tunnel OAM diagnostic results
Description
The request timed out with a reply.
The request was not sent because the originating SDP does not
exist.
The request was not sent because the originating SDP
administrative state is Down.
The request was not sent because the originating SDP
operational state is Down.
The operator terminated the request before a reply was
received, or before the timeout of the request occurred.
The request was received by the far-end, but the far-end
indicates that the originating SDP ID is invalid.
The request was received by the far-end, but the responder ID
is not the same destination SDP ID that was specified.
The reply was received, but the return SDP ID used to respond
to the request does not exist.
The reply was received, but the return SDP ID used to respond
to the request is invalid.
The reply was received, but the return SDP ID indicates that the
administrative or operational state of the SDP is Down.
The tunnel is in service and working as expected. A reply was
received without any errors.
If the Tunnel Ping passes, the network objects below the tunnel are
operating with no performance issues.
If the Tunnel Ping fails, go to step
workflow to verify the end-to-end connectivity of services using MPLS LSP
paths, if required.
7 b iii of the section 3.2
Alcatel-Lucent 5620 Service Aware Manager
Troubleshooting Guide
troubleshooting
5620 SAM