Alcatel-Lucent 5620 Troubleshooting Manual page 147

Release 12.0 R4 | August 2014 | 3HE 08864 AAAD TQZZA Edition 01
The LogViewer CLI opens in display mode. If a log file is specified as a startup
parameter, the most recent entries in the log file are displayed as they are written
to the log file. Otherwise, a cursor is displayed.
4 Enter command mode by pressing ↵. The following prompt is displayed:
log>
This prompt is called the root prompt. Table
available at the root prompt.
Enter the following at the prompt:
5
open ↵
The following prompt is displayed:
log-open>
6 Press ↵ to display the list of available logs.
7 Perform one of the following.
a
b
Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Troubleshooting Guide
Table 11-5 LogViewer CLI root menu options
Option Function
open opens a submenu for choosing the logs to view
include opens a submenu for specifying which log files to list in the open
submenu
filter opens a submenu for adding, listing or deleting filters
plugin opens a submenu for adding, listing or delete plugins
options opens a submenu for configuring LogViewer CLI and GUI application
options
list lists the files in the open submenu file list
reset resets the log message counts
stats displays LogViewer statistics for the current log
The following options are also available in submenus:
back goes to the previous menu
root goes to the root menu
quit quits the application
return returns to display mode
To view a log in the list, enter the name of a log at the prompt and press ↵.
To view a log that is not listed, perform the following steps.
i Enter the following at the prompt:
other ↵
The following prompt is displayed:
11 — Troubleshooting with the 5620 SAM LogViewer
11-5 describes the options that are
11-21