Alcatel-Lucent 5620 Troubleshooting Manual page 148

Release 12.0 R4 | August 2014 | 3HE 08864 AAAD TQZZA Edition 01
11 — Troubleshooting with the 5620 SAM LogViewer
8 Enter the following at the prompt to enter display mode and view the real-time
log updates:
return ↵
LogViewer enters display mode. Log updates are displayed as they occur.
9 To add a filter that restricts the types of log entries that are displayed during the
current LogViewer session, perform the following steps.
i
ii
iii
iv
v
vi
11-22
File Name (full path)?
ii Enter the absolute or relative path of the log file that you want to open
and press ↵. LogViewer opens the file.
Press ↵ to enter command mode.
Enter the following at the prompt to return to the root menu:
root ↵
The following prompt is displayed:
log>
Enter the following at the prompt:
filter ↵
The following prompt is displayed:
log-filter>
Note — You can also use commands at this menu level to list and
delete filters.
Enter the following at the prompt:
add ↵
The following prompt is displayed:
Filter name:
Enter a name for the filter and press ↵.
The following prompts are displayed in sequence:
Level:
Logger:
Thread:
Timestamp:
Message:
Alcatel-Lucent 5620 Service Aware Manager
Troubleshooting Guide
5620 SAM