Alcatel-Lucent 5620 Troubleshooting Manual page 149

Release 12.0 R4 | August 2014 | 3HE 08864 AAAD TQZZA Edition 01
vii
viii Enter the following to return to display mode:
10 To list the available log files, perform the following steps.
i
ii
iii
11 To display statistics about the current LogViewer session, perform the following
steps.
i
ii
iii
12 To reset the statistics counters for the current LogViewer session, perform the
following steps.
i
ii
Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Troubleshooting Guide
At each prompt, enter a regular expression to use as a match criterion, if
required, and press ↵.
The following prompt is displayed:
Display Filter? (Y/N):
Enter y ↵ to apply the filter to the current log display. LogViewer applies the
filter.
return ↵
LogViewer enters display mode. The log updates are filtered before they are
displayed.
Press ↵ to enter command mode.
Enter the following at the prompt:
list ↵
LogViewer lists the available log files.
Enter the following at the prompt to return to display mode:
return ↵
Press ↵ to enter command mode.
Enter the following at the prompt:
stats ↵
LogViewer displays statistics about the current session.
Enter the following at the prompt to return to display mode:
return ↵
Press ↵ to enter command mode.
Enter the following at the prompt:
reset ↵
11 — Troubleshooting with the 5620 SAM LogViewer
11-23