Handy Terminal Connection System Drawing; Connecting With Control Unit - Mitsubishi M80 series Connection And Set Up Manual

M800S/M80 Series Connection and Setup Manual
14 Connection of Handy Terminal
This chapter briefly explains how to connect the handy terminal to each unit and device.

14.1 Handy Terminal Connection System Drawing

Handy terminal
HOST

14.2 Connecting with Control Unit

Connect the handy terminal to SIO connector and ENC connector of the control unit.
Also, connect the emergency stop switch (SW1), enable switch (SW2), selector switch (SW) and 24VDC input to the
control panel terminal block.
Control unit
ENC ENC
Control panel
terminal block
IB-1501269-F
G430 cable
SIO SIO
SIO SIO
G430 cable
ENC ENC
Control unit
SIO
ENC
Handy terminal
Connector name: HOST
FG FG
272