Connection And Station No. Setting On Remote I/O Unit - Mitsubishi M80 series Connection And Set Up Manual

M800S/M80 Series Connection and Setup Manual
17 Setting the Hardware

17.6.2 Connection and Station No. Setting on Remote I/O Unit

When connecting directly to the control unit
Control unit
(Note) Connect the J210 cable to the RIO1 or RIO2 connector of the control unit.
Check the connector position with the actual machine.
Remote I/O 1ch
RIO1
J210
RIO2
Remote I/O 2ch
J210
331
Remote I/O unit
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points
IB-1501269-F