Mitsubishi Q01CPU User Manual page 69

2
SYSTEM CONFIGURATION
(c) When the slim type main base unit (Q3 SB) is used
Battery for QCPU (Q6BAT)
Q7BAT-SET
Battery holder Battery for QCPU (Q7BAT)
Q8BAT-SET
Q8BAT connection cable
1
Memory card
High Performance model QCPU
Battery for QCPU
(Q8BAT)
* 1: One memory card can be installed.
Select a memory card from SRAM card, Flash card, and ATA card according to the application
and capacity.
With commercial memory cards, the operation is not assured.
* 2: The slim type main base unit does not have an extension cable connector.
The extension base unit cannot be connected and bus connection of GOT is not available.
* 3: As a power supply module, use the slim type power supply module.
The Q series power supply module and the redundant power supply module are not available for
the power supply module.
Diagram 2.7 System configuration when Q3 SB is used
2.1.1 System Configuration for Single CPU System
Q3 SB slim type main base unit 2, 3
Slim type power supply module/I/O module/
Intelligent function module
2.1 System Configuration
1
2
3
4
5
6
7
8
2
- 8