Mitsubishi Q01CPU User Manual page 196

6
BASE UNIT AND EXTENSION CABLE
(6) Redundant power extension base unit (Q68RB)
6)
IN OUT
3)
2)
1)
No. Name
1) Extension cable connector
2) Base cover
3) Stage No. setting connector
4) Module connector
5) Module fixing screw hole
6) Base mounting hole
7) DIN rail adapter mounting hole DIN rail adapter mounting hole.
6
- 12 6.1 Base Unit
6.1.2 Part Names
5)
5V 5V
SG SG
FG FG
Diagram 6.6 Redundant power extension base unit (Q68RB)
Table6.14 Part Names
Connector for connecting an extension cable (for signal communications with the
redundant power main base unit or other extension base unit)
Protective cover of extension cable connector.
Before connecting an extension cable, the part under OUT on the base cover must
be removed with a tool such as a flat blade screwdriver.
Connector for setting the number of stages of redundant power extension base units.
( Section 6.1.3)
Connector for installing a redundant power supply module, I/O module and intelligent
function module.
To the connectors unused, attach the supplied connector cover or the blank cover
module (QG60) to prevent entry of dirt.
Screw hole for fixing the module to the base unit. Screw size: M3 12
Hole for mounting this base unit on the control panel. (For M4 screw)
I/O0 I/O1 I/O2 I/O3 I/O4
4)
Application
I/O5 I/O6 I/O7
7)