Mitsubishi Q01CPU User Manual page 560

12
TROUBLESHOOTING
Error code
Error item
(Hexadecimal)
41CA
H
41CB
H
41CC
H
41CD
H
41CE
H
41CF
H
41D0
H
41D1
H
41D4
H
File-related
41D5
H
errors
41D6
H
41D7
H
41D8
H
41DF
H
41E0
H
41E1
H
41E4
H
12
- 236 12.3 Error Code List
12.3.11 Error codes returned to request source during communication with CPU module
Table12.12 Error code
Error details
Access to the file sector was unsuccessful.
The format information data of the target drive
(memory) is abnormal.
The file name is specified in a wrong method.
The specified file does not exist.
Access to the file is inhibited by the system.
The specified file is write-disabled since its
attribute is read-only.
The specified drive (memory) capacity was
exceeded.
The specified drive (memory) has no free
space.
The file name is specified in a wrong method.
The specified file has exceeded the already
existing file range.
The file of the same name exists.
The format information data of the specified
drive (memory) is abnormal.
The format information data of the specified
drive (memory) is abnormal.
The specified file is being accessed.
The specified drive (memory) is write-
protected.
The specified drive (memory) is abnormal or
does not exist.
Access to the flash ROM was unsuccessful.
Access to the memory card was unsuccessful.
Corrective action
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after checking the file name.
Execute again after checking the file.
Do not access the specified file.
The specified file is write-inhibited. Execute again after
checking the attribute.
Execute again after checking the drive (memory)
capacity.
Execute again after increasing the free space of the drive
(memory).
Execute again after checking the file name.
If the error recurs after re-execution, the file information
data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after checking the size of the specified
file.
If the error recurs after re-execution, the file information
data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Forcibly execute the request, or execute after changing
the file name.
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after a while.
Execute again after canceling the write protect of the
specified drive (memory).
• Execute again after checking whether the memory
card has been installed.
• After backing up the data, execute programmable
controller memory format.
• After backing up the data, execute write to PLC (Flash
ROM).
• Execute again after checking whether the specified
drive is the Flash ROM card and whether the memory
card size is correct.
• Execute again after checking whether the memory
card has been installed.
• Execute again after replacing the memory card.
• After backing up the data, execute programmable
controller memory format.