Mitsubishi Q01CPU User Manual page 197

6
BASE UNIT AND EXTENSION CABLE
(7) Redundant extension base unit (Q65WRB)
5)
IN1 IN2
1)
No. Name
1) Extension cable connector
2) Base cover
3) Module connector
4) Module fixing screw hole
5) Base mounting hole
6) DIN rail adapter mounting hole DIN rail adapter mounting hole.
2) 4)
OUT
5V
SG
POWER 1
Diagram 6.7 Redundant extension base unit (Q65WRB)
Table6.15 Part Names
Connector for connecting an extension cable (for signal communications with the
redundant system of the main base unit)
Protective cover of extension cable connector.
Before connecting an extension cable, the part under OUT on the base cover must
be removed with a tool such as a flat blade screwdriver.
Connector for installing a redundant power supply module, I/O module and intelligent
function module.
To the connectors unused, attach the supplied connector cover or the blank cover
module (QG60) to prevent entry of dirt.
Screw hole for fixing the module to the base unit. Screw size: M3 12
Hole for mounting this base unit on the control panel. (For M4 screw)
5V
SG
POWER 2
I/O0 I/O1 I/O2
3) 6)
Application
6.1 Base Unit
6.1.2 Part Names
I/O3 I/O4
6
- 13
1
2
3
4
5
6
7
8