Error Code List (3000 To 3999) - Mitsubishi Q01CPU User Manual

12
TROUBLESHOOTING

12.3.5 Error code list (3000 to 3999)

The following shows the error messages from the error code 3000 to 3999, the contents
and causes of the errors, and the corrective actions for the errors.
Error
Error
Code
Message
(SD0)
3000
PARAMETER
ERROR
3001
*1 The function version is B or later.
*2 Parameter No. is the value gained by dividing the head I/O number of parameter in the intelligent function module set by GX Configurator by 10
*3 The diagnostic timing of CPU modules except for Universal model QCPU can be performed only when switching the CPU modules to run.
12
12.3 Error Code List
- 130
12.3.5 Error code list (3000 to 3999)
Table12.7 Error code
Common Individual
Information Information
(SD5 to 15) (SD16 to 26)
File name/ Parameter
Drive name number
LED Status CPU
Operation
RUN ERROR
Status
Off Flicker Stop
Diagnostic
Timing
At power ON/
At reset/
STOP RUN/
At writing to
programmable
controller
.
H