Display Pim Df-Info - HP 5900 Series Command Reference Manual

Field
Advertisement interval
Next advertisement scheduled at

display pim df-info

Use display pim df-info to display the DF information of BIDIR-PIM.
Syntax
display pim [ vpn-instance vpn-instance-name ] df-info [ rp-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays the DF information of
BIDIR-PIM on the public network.
rp-address: Specifies the RP address of BIDIR-PIM.
Examples
# Display the DF information of BIDIR-PIM on the public network.
<Sysname> display pim df-info
RP address: 1.1.0.3
Interface
Vlan1
Vlan2
Table 41 Command output
Field
State
DF-Pref
DF-Metric
DF-Uptime
Description
Interval between two advertisement messages sent by the locally
configured C-RP.
Remaining time for the locally configured C-RP to send the next
advertisement message.
State DF-Pref
Lose 0
Win 10
Description
DF election state:
•
•
•
•
•
Advertised route preference for DF election.
Advertised route metric for DF election.
Length of time the DF has been up.
125
DF-Metric DF-Uptime DF-Address
0 00:20:13
1 00:20:12
Win—The interface wins the DF election.
Lose—The interface loses the DF election.
Offer—The interface is in the initial state of the DF election.
Backoff—The interface is acting as the DF, but there are
more appropriate devices running for the DF.
-—The interface does not participate in the DF election.
8.13.0.3
7.11.0.1 (local)