Pim Bfd Enable - HP 5900 Series Command Reference Manual

Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, you enter public network PIM view.
Examples
# Enable IP multicast routing on the public network and enter public network PIM view.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] pim
[Sysname-pim]
# Enable IP multicast routing in VPN instance mvpn and enter PIM view of VPN instance mvpn.
<Sysname> system-view
[Sysname] multicast routing vpn-instance mvpn
[Sysname-mrib-mvpn] quit
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn]
Related commands
multicast routing-enable

pim bfd enable

Use pim bfd enable to enable BFD for PIM.
Use undo pim bfd enable to disable BFD for PIM.
Syntax
pim bfd enable
undo pim bfd enable
Default
BFD is disabled for PIM.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only when PIM-DM or PIM-SM is enabled on an interface.
Examples
# On the public network, enable IP multicast routing, enable PIM-DM on VLAN-interface 100, and
enable BFD for PIM on the interface.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim dm
141