Multicast Vpn Commands; Data-Delay; Data-Group - HP 5900 Series Command Reference Manual

Multicast VPN commands

data-delay

Use data-delay to configure the data-delay period (delay period before the default-MDT switches to the
data-MDT).
Use undo data-delay to restore the default.
Syntax
data-delay delay
undo data-delay
Default
The default setting is 3 seconds.
Views
MD view
Predefined user roles
network-admin
Parameters
delay: Specifies a data-delay period in the range of 1 to 60 seconds.
Examples
# Set the data-delay period to 20 seconds in the VPN instance mvpn.
<Sysname> system-view
[Sysname] multicast-domain vpn-instance mvpn
[Sysname-md-mvpn] data-delay 20

data-group

Use data-group to configure the data-group address range and the switchover criteria.
Use undo data-group to restore the default.
Syntax
data-group group-address { mask-length | mask } [ acl acl-number ]
undo data-group
Default
The data-group address range is not configured, and multicast traffic never switches to a data-MDT.
Views
MD view
185