Enable (Mld-Snooping View) - HP 5900 Series Command Reference Manual

<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] do
Related c ommands
mld-snooping dot1p-priority
enabl e (MLD-snooping view)
Use enable to enable MLD snooping for VLANs.
Use undo enable to disa
Syntax
enable vlan vlan-list
undo enable vlan vlan-list
Default
MLD snooping is disabled in a VLAN.
Views
MLD-snooping view
Predefined user roles
network-admin
Paramete rs
vlan vlan-li st: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a ra nge of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1
to 4094.
Usage guidelines
You must globally enable MLD snooping before you execute this command.
This command and the mld-snooping enable command have the same function but dif
ranges:
The enable command in MLD-snooping view takes effect on the specified VLANs.
•
• The mld-snooping enable command takes effect on the current VL
Fo r a VLAN, the mld-snooping enable command and the enable command in MLD-snooping view have
the same priority, and the most recent configuration takes effect.
Examples
# Enable MLD snooping glo
<Sysname> system-view
[Sysname]
[Sysname-mld-snoo
Related c ommands
mld-snooping
•
• mld-snooping enable
t1p-priority 3
ble MLD snooping for VLANs.
bally, and enable MLD snooping for VLAN 2 through VLAN 10.
mld-snooping
ping] enable vlan 2 to 10
206
ferent effective
AN.