Pim-Snooping Graceful-Restart Neighbor-Aging-Time; Reset Pim-Snooping Statistics - HP 5900 Series Command Reference Manual

[Sysname-vlan2] pim-snooping enable
[Sysname-vlan2] pim-snooping graceful-restart join-aging-time 600
Related c ommands
pim-snooping enable

pim-snooping graceful-restart neighbor-aging-time

Use pim-snooping graceful-restart neighbor-aging-time to set the
neighbor ports on the new master device in IRF master election.
Use undo pim-snooping graceful-restart neighbor-aging-time to restore the default.
Syntax
pim-snooping graceful-restart neighbor-aging-time interval
undo pim-snooping graceful-restart neighbor-aging-time
Default
The default setting is 105 seconds.
Views
VLAN view
Predefine d user roles
netw ork-admin
Paramete rs
interval: S ets an aging time in the range of 105 to 18000 seconds.
Usage gu idelines
A global neighbor port is a Layer 2 aggregate interface that acts as a neighbor port.
Yo u must enable PIM snooping for a VLAN before you execute this command for the VLAN.
Examples
# In VLAN 2, set the aging time for PI
master device in IRF maste
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snoo
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] pim-snooping enable
[Sysname-v
Related c ommands
pim-snooping enable

reset pim-snooping statistics

Use reset pim-snooping statistics to clear statistics for the PIM messages learned through PIM snooping.
r election.
ping] quit
lan2] pim-snooping graceful-restart neighbor-aging-time 300
M snooping global neighbor ports to 300 seconds on the new
52
aging time for PIM snooping global