Last-Member-Query-Count (Igmp View) - HP 5900 Series Command Reference Manual

Syntax
igmp version version-number
undo igmp version
Default
The default IGMP version is 2.
Views
Interface view
Predefined user roles
network-admin
Parameters
version-number: Specifies an IGMP version in the range of 1 to 3.
Examples
# Specify IGMP version 1 for VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp version 1

last-member-query-count (IGMP view)

Use last-member-query-count to set the global IGMP last member query count.
Use undo last-member-query-count to restore the default.
Syntax
last-member-query-count count
undo last-member-query-count
Default
The global IGMP last member query count equals the IGMP querier's robustness variable.
Views
IGMP view
Predefined user roles
network-admin
Parameters
count: Sets an IGMP last member query count in the range of 1 to 255.
Usage guidelines
This command and the igmp last-member-query-count command have the same function but different
effective ranges:
The last-member-query-count command in IGMP view takes effect on all interfaces.
•
The igmp last-member-query-count command takes effect on the current interface.
•
For an interface, the igmp
last-member-query-count command in IGMP view.
last-member-query-count command takes priority over the
103