Igmp-Snooping Query-Interval - HP 5900 Series Command Reference Manual

Views
VLAN view
Predefine d user roles
ne twork-admin
Usage gu idelines
You must enable IGMP sno
This command takes effect on a sub
Examples
# In VLAN 2, enable IGMP snooping, and e
<Sysname> system-view
[Sysname]
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping e
[Sysname-vlan2] igmp-snooping q
Related commands
enable (IGMP-snooping view)
•
• igmp-snooping enable
subvlan (multicast VLAN view)
•
igmp -snooping query-interval
Use igmp-snooping query-interval to
Use undo igmp-snooping query-interval to restore the default.
Syntax
igmp-snooping query-interval interval
undo igmp-s
Default
The IGMP gener
Views
VLAN view
Predefined user ro les
network-admin
Paramete rs
interval: Sets an IGMP general query interval in the range of
Usage guid elines
You must enable IGMP snooping for a VLAN before you execute this command.
To avoid mistakenly deleting mu
than the maximum response time fo
oping for a VLAN before you execute this command.
igmp-snooping
nooping query-interval
al query interval in a VLAN is 125 seconds.
lticast group members, set the IGMP general query interval to be greater
-VLAN only after you remove the sub-VLAN from the multicast VLAN.
nable the IGMP snooping querier.
nable
uerier
set the IGMP general query interval for a VLAN.
r IGMP general queries.
31
2 to 31744 seconds.