Igmp; Igmp Enable - HP 5900 Series Command Reference Manual

Table 36 Command output
Field
Group
Source list

igmp

Use igmp to enter IGMP view.
Use undo igmp to remove the configurations made in IGMP view.
Syntax
igmp [ vpn-instance vpn-instance-name ]
undo igmp [ vpn-instance vpn-instance-name ]
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a VPN instance, the command applies to the public network.
Examples
# Enter IGMP view for the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp]
# Enter IGMP view for VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn]

igmp enable

Use igmp enable to enable IGMP on an interface.
Use undo igmp enable to disable IGMP on an interface.
Syntax
igmp enable
undo igmp enable
Default
IGMP is disabled on all interfaces.
Description
Multicast group address.
List of multicast source addresses.
92