Mld Non-Stop-Routing; Mld Other-Querier-Present-Timeout - HP 5900 Series Command Reference Manual

mld non-stop-routing

Use mld non-stop-routing to enable MLD NSR.
Use undo mld non-stop-routing to disable MLD NSR.
Syntax
mld non-stop-routing
undo mld non-stop-routing
Default
MLD NSR is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable MLD NSR.
<Sysname> system-view
[Sysname] mld non-stop-routing

mld other-querier-present-timeout

Use mld other-querier-present-timeout to set the MLD other querier present timer on an interface.
Use undo mld other-querier-present-timeout to restore the default.
Syntax
mld other-querier-present-timeout time
undo mld other-querier-present-timeout
Default
The MLD other querier present timer is calculated by the following formula:
[ MLD general query interval ] × [ MLD querier's robustness variable ] + [ maximum response time for
MLD general queries ] / 2.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets an MLD other querier present timer in the range of 1 to 31744 seconds.
Usage guidelines
This command and the other-querier-present-timer command have the same function but different
effective ranges:
287