Display Mrib Interface - HP 5900 Series Command Reference Manual

Related commands
mac-address multicast

display mrib interface

Use display mrib interface to display information about interfaces maintained by the MRIB, including
PIM interfaces, IGMP interfaces, register interfaces, InLoopBack0 interfaces, and null0 interfaces.
Syntax
display mrib [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays information about
interfaces maintained by the MRIB on the public network.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, the command displays information about all interfaces maintained by the MRIB.
Examples
# Display information about all interfaces maintained by the MRIB on the public network.
<Sysname> display mrib interface
Interface: Vlan-interface1
Index: 0x00000001
Current state: up
MTU: 1500
Type: BROADCAST
Protocol: PIM-DM
PIM protocol state: Enabled
Address list:
Table 21 Command output
Field
Interface
Index
Current state
MTU
1. Local address : 8.12.0.2/16
Remote address: 0.0.0.0
Reference : 1
State : NORMAL
Description
Interface name.
Index number of the interface.
Current status of the interface: up or down.
MTU value.
65