Ipv6 Pim Passive - HP 5900 Series Command Reference Manual

Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
Default
Neighbor trac
Views
IPv6 PIM v iew
Predefine d user roles
network-admin
Usage guid elines
You can enable neighbor tracking for all interfaces in IPv6
interface view. The configuration made in interface view tak
IPv6 PIM view.
Examples
# Enable ne
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hell
Related commands
ipv6 pim hello-option neighbor-tracking
ipv6 p im passive
Use ipv6 pim passi
Use undo ipv6 pim passi
Syntax

ipv6 pim passive

undo ipv6 pim passive
Default
The IPv6 PIM p
Views
Interface v iew
Predefine d user roles
ne twork-admin
Usage gu idelines
This command takes effect only w
Examples
# On the public network,
mode on VLAN-interface 100.
king is disabled, and join message suppression is enabled.
ighbor tracking globally on the public network.
o-option neighbor-tracking
ve to enable IPv6 PIM passive mode on an interface.
ve to restore the default.
assive mode is disabled for an interface.
hen IPv6 PIM-DM or IPv6 PIM-SM is enabled on the interface.
enable IPv6 multicast routing. Then, enable IPv6 PIM-DM and IPv6 PIM passive
PIM view or for the current interface in
es priority over the configuration made in
322