HP 5900 Series Command Reference Manual page 139

Neighbor Interface
10.1.1.2 Vlan1
20.1.1.2 Vlan2
# Display detailed information about the PIM neighbor with the IP address 1 1.1 10.0.20 on the public
network.
<Sysname> display pim neighbor 11.110.0.20 verbose
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Bidirectional PIM: Enabled
Table 44 Command output
Field
Neighbor
Interface
Uptime
Expires/Expiry time
DR-Priority/DR Priority
Mode
Generation ID
Holdtime
LAN delay
Override interval
State refresh interval
Neighbor tracking
Bidirectional PIM
Uptime Expires
02:50:49 00:01:31 1
02:49:39 00:01:42 1
Description
IP address of the PIM neighbor.
Interface that connects to the PIM neighbor.
Length of time the PIM neighbor has been up.
Remaining lifetime for the PIM neighbor. If the PIM neighbor is always up
and reachable, this field displays never.
Priority of the PIM neighbor.
PIM mode. If the PIM mode is BIDIR-PIM, this field displays B. If a PIM
mode other than BIDIR-PIM is used, this field is blank.
Generation ID of the PIM neighbor. (A random value represents a status
change of the PIM neighbor.)
Lifetime of the PIM neighbor. If the PIM neighbor is always up and
reachable, this field displays forever.
PIM message propagation delay.
Interval for overriding prune messages.
Interval for refreshing state. This field is displayed only when the PIM
neighbor operates in PIM-DM mode and the state refresh capability is
enabled.
Neighbor tracking status: enabled or disabled.
Whether BIDIR-PIM is enabled.
129
DR-Priority Mode
B