Pim-Snooping Graceful-Restart Join-Aging-Time - HP 5900 Series Command Reference Manual

PIM snooping does not take effect on sub-VLANs of a multicast VLAN.
Examples
# Enable IGMP snooping g
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-v
Related c ommands
igmp-snooping
•
• igmp-snooping enable

pim-snooping graceful-restart join-aging-time

Use pim-snooping graceful-restart join-aging-time to set the aging time for PIM snoopin
downstream ports and global router ports on the new master device in IRF mas
Use undo pim-snooping graceful-restart join-aging-time to restore the default.
Syntax
pim-snooping graceful-restart join-aging-time interval
undo pim-snooping graceful-restart join-aging-time
Default
The default setting is 210 seconds.
Views
VLAN view
Predefine d user roles
netw ork-admin
Paramete rs
interval: S ets an aging time in the range of 210 to 18000 seconds.
Usage gu idelines
A global downstream port or a
downstream port or router port.
Yo u must enable PIM snooping for a VLAN before you execute this command for the VLAN.
Examples
# In VLAN 2, set the aging time for PIM snooping global down
600 seconds on the new m
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
lobally, and enable IGMP snooping and PIM snooping for VLAN 2.
lan2] pim-snooping enable
global router port is a Layer 2 aggregate interface that acts as a
aster device in IRF master election.
stream ports and global router ports to
51
g global
ter election.