Display Ipv6 Pim Statistics - HP 5900 Series Command Reference Manual

3:3::4
3:3::5
Table 95 Command output
Field
Group/MaskLen
[B]
RP address
Priority
HoldTime
Uptime
Expires
Preferred
Configured ACL/ACL
Mode
RP mapping for this group
displa y ipv6 pim statistics
Use display ipv6 pim statis
Syntax
display ipv6 p
Views
Any view
Predefine d user roles
ne twork-admin
network-operator
Examples
# Display statistics for IPv6 PIM pa
<Sysname> display ipv6 pim statistics
Received PIM packets: 3295
Sent PIM packets
Hello
Reg
Reg-stop : 0
JP
BSM
Description
IPv6 multicast group to which the RP is designated.
The RP provides services for IPv6 multicast groups in the BIDIR-PIM domain. If this
field is not displayed, the RP provides services for groups in the IPv6 PIM-SM
domain.
IPv6 address of the
executed, thi
Priority of the RP.
RP lifetime.
Length of time the RP has been up.
Remaining lifetime for the RP.
Whether the static RP is preferred.
ACL defining the IPv6 multicast groups to which the static RP is designated.
RP service mode: IPv6 PIM-SM or IPv6 BIDIR-PIM.
IPv6 address of the RP that provides services for the IPv6 multicast group.
tics to display statistics for IPv6 PIM packets.
im statistics
ckets.
: 5975
Valid Invalid
: 3128 0
: 14 0
0
: 151 0
: 0 0
pim-sm No
2002 pim-sm Yes
RP. If the RP resides on the device where the command is
s field displays (local) after the address.
Succeeded
4333
0
0
561
1081
318
Fai led
0
0
0
0
0