Igmp Non-Stop-Routing - HP 5900 Series Command Reference Manual

undo igmp max-response-time
Default
The maximum response time for IGMP general queries is 10 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the maximum response time for IGMP general queries, in the range of 1 to 3174 seconds.
Usage guidelines
This command and the max-response-time command in IGMP view have the same function but different
effective ranges:
The max-response-time command in IGMP view takes effect on all interfaces.
•
The igmp max-response-time command takes effect on the current interface.
•
For an interface, the igmp max-response-time command takes priority over the max-response-time
command in IGMP view.
Examples
# Set the maximum response time for IGMP general queries to 25 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp max-response-time 25
Related commands
max-response-time (IGMP view)

igmp non-stop-routing

Use igmp non-stop-routing to enable IGMP NSR.
Use undo igmp non-stop-routing to disable IGMP NSR.
Syntax
igmp non-stop-routing
undo igmp non-stop-routing
Default
IGMP NSR is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable IGMP NSR.
97