Longest-Match (Ipv6 Mrib View); Reset Ipv6 Multicast Forwarding Event - HP 5900 Series Command Reference Manual

Paramete rs
source: Sp ecifies IPv6 multicast load splitting on a per-source basis.
source-group: Specifies IPv6 multicast load splitting on
Usage guid elines
This command does not take effect on IPv6 BIDIR-PIM.
Examples
# Enable load splitting of IPv6 multicast traffic
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] load-splitting source
longe st-match (IPv6 MRIB view)
Use longest-match to specify the longest prefix match principle for RPF route selection.
Use undo longest-matc
Syntax
longest-match
undo longest-match
Default
Route preference
Views
IPv6 MRIB view
Predefined user roles
network-admin
Examples
# Specify the longest prefix match p
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] longest-match
reset ipv6 multicast forwarding event
Use reset ipv6 multicast forwarding event to clear statistics for IPv6 multica
Syntax
reset ipv6 m
Views
User view
Predefined user roles
network-admin
h to restore the default.
is used for RPF route selection.
ulticast [ vpn-instance vpn-instance-name ] forwarding event
a per-source basis and on a per-group basis.
on a per-source basis on the public network.
rinc iple for RPF route selection on the public network.
270
st forwarding events.