Replacing The Ufm; Preliminary Steps; Removing The Defective Ufm - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

System board and components

15.3.3 Replacing the UFM

Field Replaceable Unit
(FRU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– combination pliers and flat nose pliers

15.3.3.1 Preliminary steps

"Locating the defective server" on page 45
Ê
"Disabling SVOM boot watchdog functionality" on page 72
Ê
"Suspending BitLocker functionality" on page 71
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê If applicable, remove the riser module 3 as described in section
a riser module" on page

15.3.3.2 Removing the defective UFM

Ê Remove the UFM as described in section
page 304.
Ê The UFM spacer remains on the system board.
306
62.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
"Removing the UFM" on
"Removing
RX2530 M1