Installing A V.24 Interface - Siemens hipath 1100 Service Manual

Installation

Installing a V.24 Interface

4.8 Installing a V.24 Interface
Introduction
To connect a PC or a printer to the HiPath 1100 using the RS 232 serial interface you
must have a V.24 adapter cable (see"V.24 Adapter Cable" on page 3-52). This inter-
face allows you to use some applications developed specifically for configuring and
managing user features.
Connections
Step
1.
2.
3.
Note
!
With an ADSL module do not use the MB's serial connector since the HiPath 1100
serial connection is assigned to the ADSL module. All functions of the serial port are
now executed over the LAN.
4-38
Procedure
Attach the end of the V.24 serial interface cable with the Mini DIN connec-
tor (male) to the MB's serial Mini DIN connector . Attach the other end to
the printer or PC serial port. When connecting to a PC, make sure that ei-
ther the COM 1 or COM 2 port is available.
The following parameters can be configured when using a PC:
9600 / 14400 / 19200 (default) / 38400 / 56000 / 57600 / 115200 /
●
128000 / 256000 baud
Fixed settings:
8 Bits
●
1 Stop Bit
●
No Parity
●
When connecting to a printer, make sure the current time at the PABX is
set correctly.
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual