Adapter Cable - Siemens hipath 1100 Service Manual

Modules
V.24 Adapter Cable
3.11 V.24 Adapter Cable
The V.24 serial interface module cannot be used if the system has an ADSL Module
installed.
A V.24 adapter cable (S30122-x5468-x5-*) is used for connecting to a PC, a modem
(for programming the system using the HiPath 1100 Manager software, and for en-
abling CTI features) or a printer (for printing call or configuration data). .
Additional electronics built into the cables provide level adaptation. V.24 operation
requires level adaptation.
Length 15 cm
MB
6-pin Mini-DIN
connector
RTS
VDC 6 5
4 3 CTS
RxD
1
2
GND
TxD
Figure 3-36 V.24 Adapter Cable Connection System
V.24 adapter cable signals
Table 3-36 V.24 adapter cable signals
Pin
CTS
GND
RTS
RxD
TxD
3-52
Level adaptation on
the cable
Signal
Clear To Send
Ground
Request To Send
Receive Data
Transmit Data
Length 260 cm
9-pin female
SubD connector
Free 9
CTS 8
RTS 7
Free 6
For internal distribution only
Adapter
5 GND
PC PC
4 Free
Printer Printer
3 TxD
Modem Modem
2 RxD
1 Free
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual