Siemens hipath 1100 Service Manual page 169

For internal distribution only
8. During installation of the HiPath 1000 (CAPI Interface) configure these two set-
tings:
9. A message will appear indicating that the best driver for the hardware has been
found.
Click "Next" to proceed.
In the next window select "EUROISDN (DSS1)" and click "Next":
●
Figure 6-11
Enter an available extension number in the "Phone # (MSN)" field. Confirm by
●
clicking "Next." The same window appears again. Click "Next" one more time
without entering anything in any field:
Figure 6-12
10. The installation of the USB drivers is now completed. CAPI applications installa-
tion will now start automatically (see "Installing CAPI Applications" on page 6-23).
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Windows ME - selection for ISDN
Windows SE - MSN Number
Starting the Programming Mode
Operation
6-17