Table 3-35 Table - Siemens hipath 1100 Service Manual

Modules
Option Modules (MO)
The activation logic based on the initial position of the sensor contacts as well as its
resulting actions are programmable.
If a sensor is programmed, the relay can be activated through that sensor. It can be
activated either manually or automatically after a specified time. When the relay is
activated, the contacts close. When it is deactivated, the contacts open.
Electrical Requirements for Sensors and Relays
HiPath1130/1150/1190
●
On the HiPath1130/1150/1190 the external audio source (e.g., music) is connected di-
rectly to the MB at the X8 slot (see Figure 3-3).
Connection Values for an External Music Source*
●
Internal Resis-
tance
Maximum Input
Voltage
*〉
This port supports commercial CD players, receivers, MD, etc. (See Figure 4-33, "Protection and Grounding
Connection Diagram", on page 4-43).
3-42
Table 3-31 Electrical requirements for sensors and relays
Maximum loop resistance
Maximum switching current (AC)
Maximum switching current (DC)
Maximum switching voltage (AC)
Maximum switching voltage (DC)
Maximum power factor
Sensor
Relay
30 V
2.4kΩ
-10 dBm
For internal distribution only
100 Ω
1.25 A
2.00 A
RMS
24 V
0,95
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual