Installation
Installation of Expansion and Option Modules
On the HiPath 1130/1150
●
Figure 4-25
Procedure after Installation
Step
1.
2.
3.
4.
Warning
!
To turn the power on or off to the system use the cable of the power supply.
4-30
Installing a Power Supply HiPath 1130/1150
Procedure
Check network voltage
If the voltage is within the power supply's voltage range, connect the
power supply.
"Performing a Visual Inspection" on page 4-48
Configure the required data (see "Operation" on page 6-1).
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual