Music Module - Siemens hipath 1100 Service Manual

For internal distribution only

3.6.6 Music Module

Introduction
Allows music input for external calls on hold.
Functions
Links a recorded announcement or an external music source (MOH) to a UCD
●
Group when all group extensions are busy.
It also features a relay and a sensor for supporting additional devices such as En-
●
trance Telephones, Door Openers, alarms, etc.
Inputs music to external calls on hold (MOH - Music On Hold) from an internal
●
music source (music generated by the system or an external music source con-
nected to an extension) or from an external one (e.g., a radio connected directly
to the system's external music link).
HiPath 1120
●
Interfaces
Figure 3-26
Music Module Connector Assignments
Table 3-30 Music Module Connector Assignments
X1 Con- X1 Connector
tact
1 and 2 Sensor
3 and 4 Relay
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Music Module
X12 Connector
External music input (MOH)
RCA
---
Option Modules (MO)
X2 Connector
Connection to the MB is
through a pin connector
Modules
3-41