Installation Of Expansion And Option Modules; Modules Location; Figure 4-16 Location Of The Modules On The Hipath 1120 - Siemens hipath 1100 Service Manual

Installation

Installation of Expansion and Option Modules

4.6 Installation of Expansion and Option Modules
Installation Information
In the HiPath 1120 system the CPU and the modules are interconnected through a
flat cable and/or pin connector. In the HiPath1130/1150/1190 systems, the modules
are interconnected through the backplane connector.
Insert modules only when the power supply is turned OFF . For information on how
to expand your system, see"Limitations to System Expansion" on page 2-5.

4.6.1 Modules Location

On the HiPath 1120
●
Figure 4-16
4-16
Location of the Modules on the HiPath 1120
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual