Figure 6-1 Isdn Configuration Options - Siemens hipath 1100 Service Manual

For internal distribution only
Procedure:
1. Check whether the HiPath 1100 system is turned on and the computer has re-
started.
2. Insert the system CD in the CD drive
If Auto-Run is not configured, go to the Start menu on Windows, click Run and
then select the Browse button in the dialog box. Open the file SETUP .EXE on the
CD drive.
3. In the Setup window, select the language you want to use
4. Click "Install. "
A window will appear where you can select the software to be installed
5. Install your selected software components sequentially. For programming the Hi-
Path 1100 system, the following applications must be installed:
HiPath 1100 Manager E
●
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
HiPath 1100 Applications
Manager Software Up-
Billing
CommServer
HiPath
1100
C/D
S 1
0
ext.
NTBA
Digital/Analog
Figure 6-1 ISDN Configuration Options
Starting the Programming Mode
ISDN S Configura-
0
tion Options
Transmission
Status Monitor
CAPI
Driver
ISDN
Card
S
0
ISDN
S 2
0
int.
Operation
6-5