11.3.5
Utility call key setting
Utility call key setting function
The key position for calling the main menu of the utility can be specified.
For the key position, 0 or 1 point can be specified from 4 corners on the screen.
By keeping pressing the screen, a setting to switch the screen to the utility is available.
This prevents a switching to the utility by an unintentional operation.
POINT
POINT
POINT
Operation settings by GT Designer3
Select [Common Settings]
settings of the utility call key.
When change a part of the setting after downloading the project data, change the setting by [Display] screen of the
GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Utility call key display operation
Main menu
(
10.3 Utility Display)
Touch
[GOT setup]
[GOT Environment Settings]
GOT setup
Touch
[Operation]
Utility call key
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.3 Operation Settings (Settings Regarding Operation)
[GOT Setup] from GT Designer3 to make the
Operation
Touch
[Utility call key]
Touch buttons to set
for the utility call key
9
10
11
12
13
14
15
16
11 - 23