Lan Configuration What You Have To Do First - Agilent Technologies 1260 Infinity II User Manual

13
LAN Configuration
What You Have to Do First
What You Have to Do First
The module has an on- board LAN communication interface.
This chapter is generic and may show figures that differ from your module. The
N O T E
functionality is the same.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface (see
232
MAC or hardware address of the LAN interfaces is a world wide unique
identifier. No other network device will have the same hardware address.
The MAC address can be found on a label at the rear of the module
underneath the configuration switch (see
Figure 31 MAC-Label
• the PC network card using a crossover network cable (point-to-point) or
• a hub or switch using a standard LAN cable.
Figure 32 Location of LAN interfaces and MAC label
Agilent 1260 Infinity II Preparative Autosampler User Manual
Figure 32 on page 232).
Figure 32 on page 232) to