HP 3600 v2 Series Command Reference Manual page 179

Parameters
vlan-list: Specifies a list of VLANs that the hybrid ports will be assigned to, in the format of [ vlan-id1 [ to
vlan-id2 ] ]&<1- 1 0>, where vlan-id1 and vlan-id2 represent VLAN IDs and each range from 1 to 4094
and &<1- 1 0> indicates that you can specify up to 10 vlan-id1 [ to vlan-id2 ] parameters. The vlan-id2
argument cannot be smaller than the vlan-id1 argument. Make sure the specified VLANs already exist.
tagged: Configures the ports to send tagged packets of the specified VLANs.
untagged: Configures the ports to send untagged packets of the specified VLANs.
Description
Use port hybrid vlan to assign the hybrid ports to the specified VLANs.
Use undo port hybrid vlan to remove the hybrid ports from the specified VLANs.
By default, a hybrid port only allows packets from VLAN 1 to pass through untagged.
A hybrid port can carry multiple VLANs. If you execute the port hybrid vlan command multiple times, the
VLANs the hybrid port carries are the set of VLANs specified by vlan-list in each execution.
The configuration made in Layer 2 Ethernet interface view applies only to the port.
The configuration made in port group view applies to all ports in the port group.
The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its
aggregation member ports.
If the system fails to apply the configuration to the aggregate interface, it stops applying the
•
configuration to aggregation member ports.
If the system fails to apply the configuration to an aggregation member port, it skips the port and
•
moves to the next member port.
Related commands: port link-type.
Examples
# Assign the hybrid port Ethernet 1/0/1 to VLAN 2, VLAN 4, and VLAN 50 through VLAN 100, and
configure Ethernet 1/0/1 to send packets of these VLANs with tags kept.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port link-type hybrid
[Sysname-Ethernet1/0/1] port hybrid vlan 2 4 50 to 100 tagged
# Assign hybrid ports in port group 2 to VLAN 2, and configure these hybrid ports to send packets of
VLAN 2 with VLAN tags removed.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] port-group manual 2
[Sysname-port-group-manual-2] group-member ethernet 1/0/1 to ethernet 1/0/6
[Sysname-port-group-manual-2] port link-type hybrid
[Sysname-port-group-manual-2] port hybrid vlan 2 untagged
Configuring Ethernet1/0/1... Done.
Configuring Ethernet1/0/2... Done.
Configuring Ethernet1/0/3... Done.
Configuring Ethernet1/0/4... Done.
Configuring Ethernet1/0/5... Done.
171